java.lang.Object
- com.esri.arcgisruntime.tasks.networkanalysis.Facility

```
public final class Facility
extends java.lang.Object
```
Represents facility. Facility is a location that can serve as the starting point or end point of a closest facility analysis, for example, a fire station or a hospital. Facilities are part of ClosestFacilityParameters which is used as an input to ClosestFacilityTask.solveClosestFacilityAsync(ClosestFacilityParameters).

Since:

100.1.0

Constructor Summary

Constructors
Constructor Description

Facility(Point point)
Creates an instance of facility.

Method Summary

All Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`double`	`getAddedCost(java.lang.String attributeName)`	Gets the added cost that was set for this facility.
`CurbApproach`	`getCurbApproach()`	Gets the `CurbApproach` that was set.
`double`	`getCurrentBearing()`	Gets the current bearing in degrees, measured clockwise from true north.
`double`	`getCurrentBearingTolerance()`	Gets the current bearing tolerance in degrees.
`double`	`getDistanceToNetworkLocation()`	Gets the distance to the network location in meters.
`int`	`getFacilityId()`	Gets the facility ID.
`Point`	`getGeometry()`	Gets the location the facility should be placed on the map.
`double`	`getImpedanceCutoff()`	Gets the impedance cutoff.
`LocationStatus`	`getLocationStatus()`	Gets the location status.
`java.lang.String`	`getName()`	Gets the name that was set for this facility.
`double`	`getNavigationLatency()`	Gets the navigation latency in seconds.
`double`	`getNavigationSpeed()`	Gets the navigation speed in meters per second.
`NetworkLocation`	`getNetworkLocation()`	Network location.
`void`	`setAddedCost(java.lang.String attributeName, double addedCost)`	Sets the added cost for this facility.
`void`	`setCurbApproach(CurbApproach curbApproach)`	Sets the direction from which a vehicle may arrive at or depart from the facility.
`void`	`setCurrentBearing(double currentBearing)`	Sets the current bearing in degrees, measured clockwise from true north.
`void`	`setCurrentBearingTolerance(double currentBearingTolerance)`	Sets the current bearing tolerance in degrees.
`void`	`setFacilityId(int facilityId)`	Sets the facility ID.
`void`	`setImpedanceCutoff(double impedanceCutoff)`	Sets the impedance cutoff.
`void`	`setName(java.lang.String name)`	Sets the name for this facility.
`void`	`setNavigationLatency(double navigationLatency)`	Sets the navigation latency in seconds.
`void`	`setNavigationSpeed(double navigationSpeed)`	Sets the navigation speed in meters per second.
`void`	`setNetworkLocation(NetworkLocation networkLocation)`	Network location.

Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

- Constructor Detail
  - Facility
```
public Facility(Point point)
```
    Creates an instance of facility.
    
    Parameters:
    
    point - location of the facility
    
    Throws:
    
    java.lang.IllegalArgumentException - if point is null
    
    Since:
    
    100.1.0
- Method Detail
  - getName
```
public java.lang.String getName()
```
    Gets the name that was set for this facility.
    
    Returns:
    
    the name of facility. Default value is an empty string
    
    Since:
    
    100.1.0
    
    See Also:
    
    setName(String)
  - setName
```
public void setName(java.lang.String name)
```
    Sets the name for this facility.
    
    Parameters:
    
    name - facility's name. Null is treated as an empty string
    
    Since:
    
    100.1.0
    
    See Also:
    
    getName()
  - getCurbApproach
```
public CurbApproach getCurbApproach()
```
    Gets the CurbApproach that was set.
    
    Returns:
    
    the curb approach. Default value is CurbApproach.EITHER_SIDE
    
    Since:
    
    100.1.0
    
    See Also:
    
    setCurbApproach(CurbApproach)
  - setCurbApproach
```
public void setCurbApproach(CurbApproach curbApproach)
```
    Sets the direction from which a vehicle may arrive at or depart from the facility. For example, a school bus must approach and depart a school from its door side so that students entering/exiting the bus will not have to cross the street.
    
    Parameters:
    
    curbApproach - curb approach
    
    Throws:
    
    java.lang.IllegalArgumentException - if curbApproach is null
    
    Since:
    
    100.1.0
    
    See Also:
    
    getCurbApproach()
  - getNetworkLocation
```
public NetworkLocation getNetworkLocation()
```
    Network location.
    The facility's location on the network that can be populated by closest facility task.
    
    Returns:
    
    network location, or null if none
    
    Since:
    
    100.1.0
    
    See Also:
    
    NetworkLocation
  - setNetworkLocation
```
public void setNetworkLocation(NetworkLocation networkLocation)
```
    Network location.
    The facility's location on the network that can be populated by closest facility task. Set to null for resetting a network location.
    
    Parameters:
    
    networkLocation - network location
    
    Since:
    
    100.1.0
    
    See Also:
    
    NetworkLocation
  - getImpedanceCutoff
```
public double getImpedanceCutoff()
```
    Gets the impedance cutoff. Default is Double.NaN.
    For instance, while finding the closest hospitals from the site of an accident, a cutoff value of 15 minutes would mean that the closest facility task would search for the closest hospital within 15 minutes from the incident. If the closest hospital is 17 minutes away, no routes will be returned in the output routes. A cutoff value is especially useful when searching for multiple facilities or incidents. The units for impedance cutoff is based on the value of the TravelMode.getImpedanceAttributeName(). For example, if TravelMode.getImpedanceAttributeName() is TravelTime, the defaultImpedanceCutoff is specified in minutes.
    
    Returns:
    
    impedance cutoff. Returns Double.NaN by default
    
    Since:
    
    100.1.0
    
    See Also:
    
    ClosestFacilityTaskInfo.getDefaultImpedanceCutoff(), ClosestFacilityParameters.getDefaultImpedanceCutoff(), ClosestFacilityParameters.setDefaultImpedanceCutoff(double), setImpedanceCutoff(double)
  - setImpedanceCutoff
```
public void setImpedanceCutoff(double impedanceCutoff)
```
    Sets the impedance cutoff. Default is Double.NaN.
    For instance, while finding the closest hospitals from the site of an accident, a cutoff value of 15 minutes would mean that the closest facility task would search for the closest hospital within 15 minutes from the incident. If the closest hospital is 17 minutes away, no routes will be returned in the output routes. A cutoff value is especially useful when searching for multiple facilities or incidents. The units for impedance cutoff is based on the value of the TravelMode.getImpedanceAttributeName(). For example, if TravelMode.getImpedanceAttributeName() is TravelTime, the defaultImpedanceCutoff is specified in minutes.
    
    Parameters:
    
    impedanceCutoff - impedance cutoff
    
    Since:
    
    100.1.0
    
    See Also:
    
    ClosestFacilityTaskInfo.getDefaultImpedanceCutoff(), ClosestFacilityParameters.getDefaultImpedanceCutoff(), ClosestFacilityParameters.setDefaultImpedanceCutoff(double), getImpedanceCutoff()
  - getDistanceToNetworkLocation
```
public double getDistanceToNetworkLocation()
```
    Gets the distance to the network location in meters.
    
    Returns:
    
    the distance to the network location in meters. Returns NaN by default
    
    Since:
    
    100.1.0
  - getLocationStatus
```
public LocationStatus getLocationStatus()
```
    Gets the location status.
    
    Returns:
    
    the location status. Returns LocationStatus.NOT_LOCATED by default
    
    Since:
    
    100.1.0
  - getFacilityId
```
public int getFacilityId()
```
    Gets the facility ID.
    This is a caller supplied foreign key that can be used to associate output facilities with input facilities.
    
    Returns:
    
    the facility ID
    
    Since:
    
    100.6.0
    
    See Also:
    
    ClosestFacilityParameters.setFacilities(Iterable), ClosestFacilityParameters.setFacilities(ArcGISFeatureTable, QueryParameters), ClosestFacilityResult.getFacilities(), setFacilityId(int)
  - setFacilityId
```
public void setFacilityId(int facilityId)
```
    Sets the facility ID.
    This is a caller supplied foreign key that can be used to associate output facilities with input facilities.
    
    Parameters:
    
    facilityId - the facility ID
    
    Since:
    
    100.6.0
    
    See Also:
    
    ClosestFacilityParameters.setFacilities(Iterable), ClosestFacilityParameters.setFacilities(ArcGISFeatureTable, QueryParameters), ClosestFacilityResult.getFacilities(), getFacilityId()
  - getGeometry
```
public Point getGeometry()
```
    Gets the location the facility should be placed on the map.
    
    Returns:
    
    the geometry
    
    Since:
    
    100.1.0
  - getAddedCost
```
public double getAddedCost(java.lang.String attributeName)
```
    Gets the added cost that was set for this facility.
    
    Parameters:
    
    attributeName - attribute name. It can be empty. Null is treated as an empty string
    
    Returns:
    
    the added cost. Returns 0 if it was not set
    
    Since:
    
    100.1.0
  - setAddedCost
```
public void setAddedCost(java.lang.String attributeName,
                         double addedCost)
```
    Sets the added cost for this facility.
    
    Parameters:
    
    attributeName - attribute name. It can be empty. Null is treated as an empty string
    
    addedCost - added cost
    
    Since:
    
    100.1.0
  - getCurrentBearing
```
public double getCurrentBearing()
```
    Gets the current bearing in degrees, measured clockwise from true north. Typical values are 0 to 360 or NaN, negative values will have 360 added to them (e.g. -15 => 345), values greater than 360 will have 360 subtracted from them (e.g. 385 => 25). For this property to be used, the bearing tolerance must also be set.
    
    Returns:
    
    the current bearing
    
    Since:
    
    100.7.0
    
    See Also:
    
    setCurrentBearing(double)
  - setCurrentBearing
```
public void setCurrentBearing(double currentBearing)
```
    Sets the current bearing in degrees, measured clockwise from true north. Typical values are 0 to 360 or NaN, negative values will have 360 added to them (e.g. -15 => 345), values greater than 360 will have 360 subtracted from them (e.g. 385 => 25). For this property to be used, the bearing tolerance must also be set.
    
    Parameters:
    
    currentBearing - the new value for current bearing
    
    Since:
    
    100.7.0
    
    See Also:
    
    getCurrentBearing()
  - getCurrentBearingTolerance
```
public double getCurrentBearingTolerance()
```
    Gets the current bearing tolerance in degrees. Valid values are 0 to 180 or NaN.
    
    Returns:
    
    the current bearing tolerance
    
    Since:
    
    100.7.0
  - setCurrentBearingTolerance
```
public void setCurrentBearingTolerance(double currentBearingTolerance)
```
    Sets the current bearing tolerance in degrees. Valid values are 0 to 180 or NaN.
    
    Parameters:
    
    currentBearingTolerance - the new value for current bearing tolerance
    
    Throws:
    
    java.lang.IllegalArgumentException - if currentBearingTolerance is out of range
    
    Since:
    
    100.7.0
  - getNavigationLatency
```
public double getNavigationLatency()
```
    Gets the navigation latency in seconds.
    
    Returns:
    
    navigation latency in seconds
    
    Since:
    
    100.7.0
    
    See Also:
    
    setNavigationLatency(double)
  - setNavigationLatency
```
public void setNavigationLatency(double navigationLatency)
```
    Sets the navigation latency in seconds.
    
    Parameters:
    
    navigationLatency - the new value for navigation latency
    
    Since:
    
    100.7.0
    
    See Also:
    
    getNavigationLatency()
  - getNavigationSpeed
```
public double getNavigationSpeed()
```
    Gets the navigation speed in meters per second.
    
    Returns:
    
    navigation speed in meters per second
    
    Since:
    
    100.7.0
    
    See Also:
    
    setNavigationSpeed(double)
  - setNavigationSpeed
```
public void setNavigationSpeed(double navigationSpeed)
```
    Sets the navigation speed in meters per second.
    
    Parameters:
    
    navigationSpeed - the new value for navigation speed
    
    Since:
    
    100.7.0
    
    See Also:
    
    getNavigationSpeed()

Class Facility

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Constructor Detail

Facility

Method Detail

getName

setName

getCurbApproach

setCurbApproach

getNetworkLocation

setNetworkLocation

getImpedanceCutoff

setImpedanceCutoff

getDistanceToNetworkLocation

getLocationStatus

getFacilityId

setFacilityId

getGeometry

getAddedCost

setAddedCost

getCurrentBearing

setCurrentBearing

getCurrentBearingTolerance

setCurrentBearingTolerance

getNavigationLatency

setNavigationLatency

getNavigationSpeed

setNavigationSpeed