ClosestFacilityParameters
which is
used as an input to ClosestFacilityTask.solveClosestFacilityAsync(ClosestFacilityParameters)
.- Since:
- 100.1.0
-
Constructor Summary
-
Method Summary
Modifier and TypeMethodDescriptiondouble
getAddedCost
(String attributeName) Gets the added cost that was set for this facility.Gets theCurbApproach
that was set.double
Gets the current bearing in degrees, measured clockwise from true north.double
Gets the current bearing tolerance in degrees.double
Gets the distance to the network location in meters.int
Gets the facility ID.Gets the location the facility should be placed on the map.double
Gets the impedance cutoff.Gets the location status.getName()
Gets the name that was set for this facility.double
Gets the navigation latency in seconds.double
Gets the navigation speed in meters per second.Network location.void
setAddedCost
(String attributeName, double addedCost) Sets the added cost for this facility.void
setCurbApproach
(CurbApproach curbApproach) Sets the direction from which a vehicle may arrive at or depart from the facility.void
setCurrentBearing
(double currentBearing) Sets the current bearing in degrees, measured clockwise from true north.void
setCurrentBearingTolerance
(double currentBearingTolerance) Sets the current bearing tolerance in degrees.void
setFacilityId
(int facilityId) Sets the facility ID.void
setImpedanceCutoff
(double impedanceCutoff) Sets the impedance cutoff.void
Sets the name for this facility.void
setNavigationLatency
(double navigationLatency) Sets the navigation latency in seconds.void
setNavigationSpeed
(double navigationSpeed) Sets the navigation speed in meters per second.void
setNetworkLocation
(NetworkLocation networkLocation) Network location.
-
Constructor Details
-
Facility
Creates an instance of facility.- Parameters:
point
- location of the facility- Throws:
IllegalArgumentException
- if point is null- Since:
- 100.1.0
-
-
Method Details
-
getName
Gets the name that was set for this facility.- Returns:
- the name of facility. Default value is an empty string
- Since:
- 100.1.0
- See Also:
-
setName
Sets the name for this facility.- Parameters:
name
- facility's name. Null is treated as an empty string- Since:
- 100.1.0
- See Also:
-
getCurbApproach
Gets theCurbApproach
that was set.- Returns:
- the curb approach. Default value is
CurbApproach.EITHER_SIDE
- Since:
- 100.1.0
- See Also:
-
setCurbApproach
Sets the direction from which a vehicle may arrive at or depart from the facility. For example, a school bus must approach and depart a school from its door side so that students entering/exiting the bus will not have to cross the street.- Parameters:
curbApproach
- curb approach- Throws:
IllegalArgumentException
- if curbApproach is null- Since:
- 100.1.0
- See Also:
-
getNetworkLocation
Network location.The facility's location on the network that can be populated by closest facility task.
- Returns:
- network location, or null if none
- Since:
- 100.1.0
-
setNetworkLocation
Network location.The facility's location on the network that can be populated by closest facility task. Set to null for resetting a network location.
- Parameters:
networkLocation
- network location- Since:
- 100.1.0
-
getImpedanceCutoff
public double getImpedanceCutoff()Gets the impedance cutoff. Default is Double.NaN.For instance, while finding the closest hospitals from the site of an accident, a cutoff value of 15 minutes would mean that the closest facility task would search for the closest hospital within 15 minutes from the incident. If the closest hospital is 17 minutes away, no routes will be returned in the output routes. A cutoff value is especially useful when searching for multiple facilities or incidents. The units for impedance cutoff is based on the value of the
TravelMode.getImpedanceAttributeName()
. For example, ifTravelMode.getImpedanceAttributeName()
is TravelTime, the defaultImpedanceCutoff is specified in minutes.- Returns:
- impedance cutoff. Returns Double.NaN by default
- Since:
- 100.1.0
- See Also:
-
setImpedanceCutoff
public void setImpedanceCutoff(double impedanceCutoff) Sets the impedance cutoff. Default is Double.NaN.For instance, while finding the closest hospitals from the site of an accident, a cutoff value of 15 minutes would mean that the closest facility task would search for the closest hospital within 15 minutes from the incident. If the closest hospital is 17 minutes away, no routes will be returned in the output routes. A cutoff value is especially useful when searching for multiple facilities or incidents. The units for impedance cutoff is based on the value of the
TravelMode.getImpedanceAttributeName()
. For example, ifTravelMode.getImpedanceAttributeName()
is TravelTime, the defaultImpedanceCutoff is specified in minutes.- Parameters:
impedanceCutoff
- impedance cutoff- Since:
- 100.1.0
- See Also:
-
getDistanceToNetworkLocation
public double getDistanceToNetworkLocation()Gets the distance to the network location in meters.- Returns:
- the distance to the network location in meters. Returns NaN by default
- Since:
- 100.1.0
-
getLocationStatus
Gets the location status.- Returns:
- the location status. Returns
LocationStatus.NOT_LOCATED
by default - Since:
- 100.1.0
-
getFacilityId
public int getFacilityId()Gets the facility ID.This is a caller supplied foreign key that can be used to associate output facilities with input facilities.
- Returns:
- the facility ID
- Since:
- 100.6.0
- See Also:
-
setFacilityId
public void setFacilityId(int facilityId) Sets the facility ID.This is a caller supplied foreign key that can be used to associate output facilities with input facilities.
- Parameters:
facilityId
- the facility ID- Since:
- 100.6.0
- See Also:
-
getGeometry
Gets the location the facility should be placed on the map.- Returns:
- the geometry
- Since:
- 100.1.0
-
getAddedCost
Gets the added cost that was set for this facility.- Parameters:
attributeName
- attribute name. It can be empty. Null is treated as an empty string- Returns:
- the added cost. Returns 0 if it was not set
- Since:
- 100.1.0
-
setAddedCost
Sets the added cost for this facility.- Parameters:
attributeName
- attribute name. It can be empty. Null is treated as an empty stringaddedCost
- added cost- Since:
- 100.1.0
-
getCurrentBearing
public double getCurrentBearing()Gets the current bearing in degrees, measured clockwise from true north. Typical values are 0 to 360 or NaN, negative values will have 360 added to them (e.g. -15 => 345), values greater than 360 will have 360 subtracted from them (e.g. 385 => 25). For this property to be used, the bearing tolerance must also be set.- Returns:
- the current bearing
- Since:
- 100.7.0
- See Also:
-
setCurrentBearing
public void setCurrentBearing(double currentBearing) Sets the current bearing in degrees, measured clockwise from true north. Typical values are 0 to 360 or NaN, negative values will have 360 added to them (e.g. -15 => 345), values greater than 360 will have 360 subtracted from them (e.g. 385 => 25). For this property to be used, the bearing tolerance must also be set.- Parameters:
currentBearing
- the new value for current bearing- Since:
- 100.7.0
- See Also:
-
getCurrentBearingTolerance
public double getCurrentBearingTolerance()Gets the current bearing tolerance in degrees. Valid values are 0 to 180 or NaN.- Returns:
- the current bearing tolerance
- Since:
- 100.7.0
-
setCurrentBearingTolerance
public void setCurrentBearingTolerance(double currentBearingTolerance) Sets the current bearing tolerance in degrees. Valid values are 0 to 180 or NaN.- Parameters:
currentBearingTolerance
- the new value for current bearing tolerance- Throws:
IllegalArgumentException
- if currentBearingTolerance is out of range- Since:
- 100.7.0
-