Generate convex hull polygon(s) from multiple input geometries.
Use case
Creating a convex hull allows for analysis to define the polygon with the least possible perimeter that encloses a group of geometric shapes. As a visual analogy, consider a set of nails in a board where the convex hull is a rubber band stretched around the outermost nails.
How to use the sample
Click the 'Create Convex Hull' button to create convex hull(s) from the polygon graphics. If the 'Union' checkbox is checked, the resulting output will be one polygon being the convex hull for the two input polygons. If the 'Union' checkbox is un-checked, the resulting output will have two convex hull polygons - one for each of the two input polygons. Click the 'Clear' button to start over.
How it works
- Create an
ArcGISMap
and display it in aMapView
. - Create two input polygon graphics and add them to a
GraphicsOverlay
. - Call
GeometryEngine.convexHull(inputGeometries, boolean)
, specifying a list of geometries for which to generate the convex hull. Set the boolean parameter totrue
to generate a convex hull for the union of the geometries. Set it tofalse
to create a convex hull for each individual geometry. - Loop through the returned geometries and add them as graphics for display on the map.
Relevant API
- GeometryEngine
- Graphic
- GraphicsOverlay
Tags
analysis, geometry, outline, perimeter, union
Sample Code
/*
* Copyright 2018 Esri.
*
* Licensed under the Apache License, Version 2.0 (the "License"); you may not
* use this file except in compliance with the License. You may obtain a copy of
* the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations under
* the License.
*/
package com.esri.samples.convex_hull_list;
import java.util.Arrays;
import java.util.List;
import javafx.application.Application;
import javafx.geometry.Insets;
import javafx.geometry.Pos;
import javafx.scene.Scene;
import javafx.scene.control.CheckBox;
import javafx.scene.layout.Background;
import javafx.scene.layout.BackgroundFill;
import javafx.scene.layout.CornerRadii;
import javafx.scene.layout.StackPane;
import javafx.scene.layout.VBox;
import javafx.scene.paint.Paint;
import javafx.stage.Stage;
import javafx.scene.control.Button;
import com.esri.arcgisruntime.ArcGISRuntimeEnvironment;
import com.esri.arcgisruntime.geometry.Geometry;
import com.esri.arcgisruntime.geometry.GeometryEngine;
import com.esri.arcgisruntime.geometry.Point;
import com.esri.arcgisruntime.geometry.PointCollection;
import com.esri.arcgisruntime.geometry.Polygon;
import com.esri.arcgisruntime.geometry.SpatialReferences;
import com.esri.arcgisruntime.mapping.ArcGISMap;
import com.esri.arcgisruntime.mapping.BasemapStyle;
import com.esri.arcgisruntime.mapping.Viewpoint;
import com.esri.arcgisruntime.mapping.view.Graphic;
import com.esri.arcgisruntime.mapping.view.GraphicsOverlay;
import com.esri.arcgisruntime.mapping.view.MapView;
import com.esri.arcgisruntime.symbology.SimpleFillSymbol;
import com.esri.arcgisruntime.symbology.SimpleLineSymbol;
public class ConvexHullListSample extends Application {
private MapView mapView;
@Override
public void start(Stage stage) {
try {
// create stack pane and application scene
StackPane stackPane = new StackPane();
Scene scene = new Scene(stackPane);
scene.getStylesheets().add(getClass().getResource("/convex_hull_list/style.css").toExternalForm());
// set title, size, and add scene to stage
stage.setTitle("Convex Hull List Sample");
stage.setWidth(800);
stage.setHeight(700);
stage.setScene(scene);
stage.show();
// authentication with an API key or named user is required to access basemaps and other location services
String yourAPIKey = System.getProperty("apiKey");
ArcGISRuntimeEnvironment.setApiKey(yourAPIKey);
// create a map with the topographic basemap style
ArcGISMap map = new ArcGISMap(BasemapStyle.ARCGIS_TOPOGRAPHIC);
// create a map view and set the map to it
mapView = new MapView();
mapView.setMap(map);
// set a viewpoint on the map view
mapView.setViewpoint(new Viewpoint(30.0, 0.0, 147914381));
// create a graphics overlay for the two input polygons
GraphicsOverlay polygonGraphicsOverlay = new GraphicsOverlay();
// create a graphics overlay for displaying convex hull polygon
GraphicsOverlay convexHullGraphicsOverlay = new GraphicsOverlay();
// add the graphics overlays to the map view
mapView.getGraphicsOverlays().add(convexHullGraphicsOverlay);
mapView.getGraphicsOverlays().add(polygonGraphicsOverlay);
// create a simple line symbol for the outline of the two input polygon graphics
SimpleLineSymbol polygonOutline = new SimpleLineSymbol(SimpleLineSymbol.Style.SOLID, 0xFF0000FF, 3);
// create a simple fill symbol for the two input polygon graphics
SimpleFillSymbol polygonFill = new SimpleFillSymbol(SimpleFillSymbol.Style.SOLID, 0x300000FF, polygonOutline);
// create a point collection that represents polygon1. Use the same spatial reference as the underlying base map.
PointCollection pointCollection1 = new PointCollection(SpatialReferences.getWebMercator());
// add polygon1 boundary map points to the point collection
pointCollection1.add(new Point(-4983189.15470412, 8679428.55774286));
pointCollection1.add(new Point(-5222621.66664186, 5147799.00666126));
pointCollection1.add(new Point(-13483043.3284937, 4728792.11077023));
pointCollection1.add(new Point(-13273539.8805482, 2244679.79941622));
pointCollection1.add(new Point(-5372266.98660294, 2035176.3514707));
pointCollection1.add(new Point(-5432125.11458738, -4100281.76693377));
pointCollection1.add(new Point(-2469147.7793579, -4160139.89491821));
pointCollection1.add(new Point(-1900495.56350578, 2035176.3514707));
pointCollection1.add(new Point(2768438.41928007, 1975318.22348627));
pointCollection1.add(new Point(2409289.65137346, 5477018.71057565));
pointCollection1.add(new Point(-2409289.65137346, 5387231.518599));
pointCollection1.add(new Point(-2469147.7793579, 8709357.62173508));
// create a polygon geometry from the point collection
Polygon polygon1 = new Polygon(pointCollection1);
// create the graphic for polygon1
Graphic polygonGraphic1 = new Graphic(polygon1, polygonFill);
// add the polygon1 graphic to the graphics overlay collection
polygonGraphicsOverlay.getGraphics().add(polygonGraphic1);
// create a point collection that represents polygon2. Use the same spatial reference as the underlying base map.
PointCollection pointCollection2 = new PointCollection(SpatialReferences.getWebMercator());
// add polygon2 boundary map points to the point collection
pointCollection2.add(new Point(5993520.19456882, -1063938.49607736));
pointCollection2.add(new Point(3085421.63862418, -1383120.04490055));
pointCollection2.add(new Point(3794713.96934239, -2979027.78901651));
pointCollection2.add(new Point(6880135.60796657, -4078430.90162972));
pointCollection2.add(new Point(7092923.30718203, -2837169.32287287));
pointCollection2.add(new Point(8617901.81822617, -2092412.37561875));
pointCollection2.add(new Point(6986529.4575743, 354646.16535905));
pointCollection2.add(new Point(5319692.48038653, 1205796.96222089));
// create a polygon geometry from the point collection
Polygon polygon2 = new Polygon(pointCollection2);
// create the graphic for polygon2
Graphic polygonGraphic2 = new Graphic(polygon2, polygonFill);
// add the polygon2 graphic to the graphics overlay collection
polygonGraphicsOverlay.getGraphics().add(polygonGraphic2);
// create a button to create and show the convex hull
Button convexHullButton = new Button("Create Convex Hull");
convexHullButton.setMaxWidth(Double.MAX_VALUE);
// create a button to clear the convex hull results
Button clearButton = new Button("Clear");
clearButton.setMaxWidth(Double.MAX_VALUE);
// create a check box for toggling union option on or off
CheckBox checkBox = new CheckBox("Union");
convexHullButton.setOnAction(e -> {
// reset the convex hull graphics overlay
convexHullGraphicsOverlay.getGraphics().clear();
// add the geometries of the two polygon graphics to a list of geometries
List<Geometry> allPolygonGeometries = Arrays.asList(polygonGraphic1.getGeometry(), polygonGraphic2.getGeometry());
// retrieve the returned result from the convex hull operation
// if unioned, one geometry is returned, otherwise one convex hull geometry is returned per input geometry
List<Geometry> convexHullGeometries = GeometryEngine.convexHull(allPolygonGeometries, checkBox.isSelected());
// loop through the returned geometries.
for (Geometry geometry : convexHullGeometries) {
// create a simple line symbol for the outline of the convex hull graphic(s)
SimpleLineSymbol convexHullLine = new SimpleLineSymbol(SimpleLineSymbol.Style.SOLID, 0xFFFF0000, 5);
// Create the simple fill symbol for the convex hull graphic(s)
SimpleFillSymbol convexHullFill = new SimpleFillSymbol(SimpleFillSymbol.Style.NULL, 0x00000000, convexHullLine);
// create the graphic for the convex hull(s)
Graphic convexHullGraphic = new Graphic(geometry, convexHullFill);
// add the convex hull(s) graphic to the convex hull graphics overlay
convexHullGraphicsOverlay.getGraphics().add(convexHullGraphic);
}
// enable clear button after convex hull button has been pressed
clearButton.setDisable(false);
});
// disable clear button from starting application (when nothing to clear)
clearButton.setDisable(true);
clearButton.setOnAction(e -> {
// clear convex hull graphics from map view
convexHullGraphicsOverlay.getGraphics().clear();
// once cleared disable clear button
clearButton.setDisable(true);
// enable convex hull button after clearing
convexHullButton.setDisable(false);
// reset checkbox
checkBox.setSelected(false);
});
// create a control panel
VBox controlsVBox = new VBox(6);
controlsVBox.setBackground(new Background(new BackgroundFill(Paint.valueOf("rgba(0, 0, 0, 0.3)"),
CornerRadii.EMPTY, Insets.EMPTY)));
controlsVBox.setPadding(new Insets(10));
controlsVBox.setMaxSize(260, 110);
controlsVBox.getStyleClass().add("panel-region");
controlsVBox.getChildren().addAll(convexHullButton, clearButton, checkBox);
// add the map view to the stack pane
stackPane.getChildren().addAll(mapView, controlsVBox);
stackPane.setAlignment(controlsVBox, Pos.TOP_RIGHT);
stackPane.setMargin(controlsVBox, new Insets(10, 10, 0, 10));
} catch (Exception e) {
// on any error, display the stack trace
e.printStackTrace();
}
}
/**
* Stops and releases all resources used in application
*/
@Override
public void stop() {
// release resources when the application closes
if (mapView != null) {
mapView.dispose();
}
}
/**
* Opens and runs application.
*
* @param args arguments passed to this application
*/
public static void main(String[] args) {
Application.launch(args);
}
}