Find a route that reaches all stops without crossing any barriers.
Use case
You can define barriers to avoid unsafe areas, for example flooded roads, when planning the most efficient route to evacuate a hurricane zone. When solving a route, barriers allow you to define portions of the road network that cannot be traversed. You could also use this functionality to plan routes when you know an area will be inaccessible due to a community activity like an organized race or a market night.
In some situations, it is further beneficial to find the most efficient route that reaches all stops, reordering them to reduce travel time. For example, a delivery service may target a number of drop-off addresses, specifically looking to avoid congested areas or closed roads, arranging the stops in the most time-effective order.
How to use the sample
Use the "Edit Mode" toggle buttons to select whether to add Stops or Barriers to the route. The route will be solved automatically as you add stops and barriers, and information about the length of the route and directions will be shown in the controls area. Select "Find best sequence" to allow stops to be re-ordered in order to find an optimum route. Select "Preserve first stop" to preserve the first stop. Select "Preserve last stop" to preserve the last stop. You can use the "Reset" button to reset the sample.
How it works
- Create a
RouteTask
with the URL to a Network Analysis route service. - Get the default
RouteParameters
for the service, and create the desiredStop
s andPolygonBarrier
s. - Add the stops and barriers to the route's parameters,
routeParameters.setStops(routeStops)
androuteParameters.setPolygonBarriers(routeBarriers)
. - Set the
ReturnStops
andReturnDirections
totrue
. - If the user will accept routes with the stops in any order, set
FindBestSequence
totrue
to find the most optimal route. - If the user has a definite start point, set
PreserveFirstStop
totrue
. - If the user has a definite final destination, set
PreserveLastStop
totrue
. - Call
routeTask.solveRouteAsync(routeParameters)
to get aRouteResult
. - Get the first returned route by calling
routeResult.getRoutes().get(0)
. - Get the geometry from the route to display the route to the map.
Relevant API
- DirectionManeuver
- PolygonBarrier
- Route
- RouteParameters
- RouteResult
- RouteTask
- Stop
About the data
This sample uses an Esri-hosted sample street network for San Diego.
Tags
barriers, best sequence, directions, maneuver, network analysis, routing, sequence, stop order, stops
Sample Code
/*
* Copyright 2019 Esri.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package com.esri.samples.routing_around_barriers;
import java.util.Arrays;
import java.util.LinkedList;
import java.util.concurrent.ExecutionException;
import javafx.fxml.FXML;
import javafx.geometry.Point2D;
import javafx.scene.control.Alert;
import javafx.scene.control.Button;
import javafx.scene.control.CheckBox;
import javafx.scene.control.ListView;
import javafx.scene.control.TitledPane;
import javafx.scene.control.ToggleButton;
import javafx.scene.image.Image;
import javafx.scene.input.MouseButton;
import javafx.scene.input.MouseEvent;
import com.esri.arcgisruntime.ArcGISRuntimeEnvironment;
import com.esri.arcgisruntime.concurrent.ListenableFuture;
import com.esri.arcgisruntime.geometry.Geometry;
import com.esri.arcgisruntime.geometry.GeometryEngine;
import com.esri.arcgisruntime.geometry.Point;
import com.esri.arcgisruntime.geometry.Polygon;
import com.esri.arcgisruntime.loadable.LoadStatus;
import com.esri.arcgisruntime.mapping.ArcGISMap;
import com.esri.arcgisruntime.mapping.BasemapStyle;
import com.esri.arcgisruntime.mapping.Viewpoint;
import com.esri.arcgisruntime.mapping.view.Graphic;
import com.esri.arcgisruntime.mapping.view.GraphicsOverlay;
import com.esri.arcgisruntime.mapping.view.MapView;
import com.esri.arcgisruntime.symbology.CompositeSymbol;
import com.esri.arcgisruntime.symbology.PictureMarkerSymbol;
import com.esri.arcgisruntime.symbology.SimpleFillSymbol;
import com.esri.arcgisruntime.symbology.SimpleLineSymbol;
import com.esri.arcgisruntime.symbology.SimpleRenderer;
import com.esri.arcgisruntime.symbology.TextSymbol;
import com.esri.arcgisruntime.tasks.networkanalysis.DirectionManeuver;
import com.esri.arcgisruntime.tasks.networkanalysis.PolygonBarrier;
import com.esri.arcgisruntime.tasks.networkanalysis.Route;
import com.esri.arcgisruntime.tasks.networkanalysis.RouteParameters;
import com.esri.arcgisruntime.tasks.networkanalysis.RouteResult;
import com.esri.arcgisruntime.tasks.networkanalysis.RouteTask;
import com.esri.arcgisruntime.tasks.networkanalysis.Stop;
public class RoutingAroundBarriersController {
@FXML private MapView mapView;
@FXML private ToggleButton btnAddStop;
@FXML private ToggleButton btnAddBarrier;
@FXML private Button btnReset;
@FXML private CheckBox findBestSequenceCheckBox;
@FXML private CheckBox preserveFirstStopCheckBox;
@FXML private CheckBox preserveLastStopCheckBox;
@FXML private ListView<String> directionsList;
@FXML private TitledPane routeInformationTitledPane;
private GraphicsOverlay routeGraphicsOverlay = new GraphicsOverlay();
private GraphicsOverlay stopsGraphicsOverlay = new GraphicsOverlay();
private GraphicsOverlay barriersGraphicsOverlay = new GraphicsOverlay();
private Image pinImage;
private LinkedList<Stop> stopsList = new LinkedList<>();
private LinkedList<PolygonBarrier> barriersList = new LinkedList<>();
private PictureMarkerSymbol pinSymbol;
private RouteTask routeTask;
private RouteParameters routeParameters;
private SimpleFillSymbol barrierSymbol;
@FXML
public void initialize() {
// authentication with an API key or named user is required to access basemaps and other location services
String yourAPIKey = System.getProperty("apiKey");
ArcGISRuntimeEnvironment.setApiKey(yourAPIKey);
// create a map with the streets basemap style and set it to the map view
ArcGISMap map = new ArcGISMap(BasemapStyle.ARCGIS_STREETS);
mapView.setMap(map);
// set a viewpoint on the map view
mapView.setViewpoint(new Viewpoint(32.727, -117.1750, 40000));
// add the graphics overlays to the map view
mapView.getGraphicsOverlays().addAll(Arrays.asList(stopsGraphicsOverlay, barriersGraphicsOverlay, routeGraphicsOverlay));
// initialize the TitlePane of the Accordion box
routeInformationTitledPane.setText("No route to display");
// create symbols for displaying the barriers and the route line
barrierSymbol = new SimpleFillSymbol(SimpleFillSymbol.Style.DIAGONAL_CROSS, 0xFFFF0000, null);
SimpleLineSymbol routeLineSymbol = new SimpleLineSymbol(SimpleLineSymbol.Style.SOLID, 0x800000FF, 5.0f);
// create simple renderer for routes, and set it to use the line symbol
SimpleRenderer routeRenderer = new SimpleRenderer();
routeRenderer.setSymbol(routeLineSymbol);
routeGraphicsOverlay.setRenderer(routeRenderer);
// create a marker with a pin image and position it
pinImage = new Image(getClass().getResourceAsStream("/routing_around_barriers/orange_symbol.png"), 0, 40, true, true);
pinSymbol = new PictureMarkerSymbol(pinImage);
pinSymbol.setOffsetY(20);
pinSymbol.loadAsync();
// create route task from San Diego service
routeTask = new RouteTask("https://sampleserver6.arcgisonline.com/arcgis/rest/services/NetworkAnalysis/SanDiego/NAServer/Route");
routeTask.loadAsync();
// wait for the route task to load
routeTask.addDoneLoadingListener(() -> {
if (routeTask.getLoadStatus() == LoadStatus.LOADED) {
// get default route parameters
final ListenableFuture<RouteParameters> routeParametersFuture = routeTask.createDefaultParametersAsync();
routeParametersFuture.addDoneListener(() -> {
try {
routeParameters = routeParametersFuture.get();
// set flags to return stops and directions
routeParameters.setReturnStops(true);
routeParameters.setReturnDirections(true);
} catch (InterruptedException | ExecutionException e) {
new Alert(Alert.AlertType.ERROR, "Cannot create RouteTask parameters " + e.getMessage()).show();
}
});
} else {
new Alert(Alert.AlertType.ERROR, "Unable to load RouteTask " + routeTask.getLoadStatus().toString()).show();
}
});
}
/**
* Handles clicks on the map view to add/remove stops and barriers.
*
* @param e mouse click event
*/
@FXML
private void handleMapViewClicked(MouseEvent e) {
if (e.isStillSincePress()) {
// convert clicked point to a map point
Point mapPoint = mapView.screenToLocation(new Point2D(e.getX(), e.getY()));
// normalize geometry - important for geometries that will be sent to a server for processing
mapPoint = (Point) GeometryEngine.normalizeCentralMeridian(mapPoint);
// if the primary mouse button was clicked, add a stop or barrier to the clicked map point
if (e.getButton() == MouseButton.PRIMARY) {
// clear the displayed route, if it exists, since it might not be up to date any more
routeGraphicsOverlay.getGraphics().clear();
if (btnAddStop.isSelected()) {
// use the clicked map point to construct a stop
Stop stopPoint = new Stop(new Point(mapPoint.getX(), mapPoint.getY(), mapPoint.getSpatialReference()));
// add the new stop to the list of stops
stopsList.add(stopPoint);
// create a marker symbol and graphics, and add the graphics to the graphics overlay
CompositeSymbol newStopSymbol = createCompositeStopSymbol(stopsList.size());
Graphic stopGraphic = new Graphic(mapPoint, newStopSymbol);
stopsGraphicsOverlay.getGraphics().add(stopGraphic);
} else if (btnAddBarrier.isSelected()) {
// create a buffered polygon around the clicked point
Polygon bufferedBarrierPolygon = GeometryEngine.buffer(mapPoint, 500);
// create a polygon barrier for the routing task, and add it to the list of barriers
PolygonBarrier barrier = new PolygonBarrier(bufferedBarrierPolygon);
barriersList.add(barrier);
// build graphics for the barrier and add it to the graphics overlay
Graphic barrierGraphic = new Graphic(bufferedBarrierPolygon, barrierSymbol);
barriersGraphicsOverlay.getGraphics().add(barrierGraphic);
}
// if the secondary mouse button was clicked, delete the last stop or barrier, respectively
} else if (e.getButton() == MouseButton.SECONDARY) {
// check if we can remove stops
if (btnAddStop.isSelected() && !stopsList.isEmpty()) {
// clear the displayed route, if it exists, since it might not be up to date any more
routeGraphicsOverlay.getGraphics().clear();
// remove the last stop from the stop list and the graphics overlay
stopsList.removeLast();
stopsGraphicsOverlay.getGraphics().remove(stopsGraphicsOverlay.getGraphics().size() - 1);
// check if we can remove barriers
} else if (btnAddBarrier.isSelected() && !barriersList.isEmpty()) {
// clear the displayed route, if it exists, since it might not be up to date any more
routeGraphicsOverlay.getGraphics().clear();
// remove the last barrier from the barrier list and the graphics overlay
barriersList.removeLast();
barriersGraphicsOverlay.getGraphics().remove(barriersGraphicsOverlay.getGraphics().size() - 1);
}
}
createRouteAndDisplay();
}
}
/**
* Uses the route task with the lists of stops and barriers to determine the route and display it.
*/
@FXML
private void createRouteAndDisplay() {
if (stopsList.size() >= 2) {
// clear the previous route from the graphics overlay, if it exists
routeGraphicsOverlay.getGraphics().clear();
// clear the directions list from the directions list view, if they exist
directionsList.getItems().clear();
// add the existing stops and barriers to the route parameters
routeParameters.setStops(stopsList);
routeParameters.setPolygonBarriers(barriersList);
// apply the requested route finding parameters
routeParameters.setFindBestSequence(findBestSequenceCheckBox.isSelected());
routeParameters.setPreserveFirstStop(preserveFirstStopCheckBox.isSelected());
routeParameters.setPreserveLastStop(preserveLastStopCheckBox.isSelected());
// solve the route task
final ListenableFuture<RouteResult> routeResultFuture = routeTask.solveRouteAsync(routeParameters);
routeResultFuture.addDoneListener(() -> {
try {
RouteResult routeResult = routeResultFuture.get();
if (!routeResult.getRoutes().isEmpty()) {
// get the first route result
Route firstRoute = routeResult.getRoutes().get(0);
// create a geometry for this route
Geometry routeGeometry = firstRoute.getRouteGeometry();
// create a graphic for the route and add it to the graphics overlay
Graphic routeGraphic = new Graphic(routeGeometry);
routeGraphicsOverlay.getGraphics().add(routeGraphic);
// set the title of the TitledPane to display the information
String output = String.format("Route directions: %d min (%.2f km)", Math.round(firstRoute.getTravelTime()), firstRoute.getTotalLength() / 1000);
routeInformationTitledPane.setText(output);
// get the direction text for each maneuver and add them to the list to display
for (DirectionManeuver maneuver : firstRoute.getDirectionManeuvers()) {
directionsList.getItems().add(maneuver.getDirectionText());
}
} else {
new Alert(Alert.AlertType.ERROR, "No possible routes found").show();
}
} catch (InterruptedException | ExecutionException e) {
new Alert(Alert.AlertType.ERROR, "Solve RouteTask failed").show();
}
// enable the reset button
btnReset.setDisable(false);
});
} else {
// reset the route information title pane since no route is displayed
routeInformationTitledPane.setText("No route to display");
// clear the directions list since no route is displayed
directionsList.getItems().clear();
}
}
/**
* Clears stops and barriers from the route parameters, clears direction list and graphics overlays.
*/
@FXML
private void clearRouteAndGraphics() {
// clear stops from route parameters and stops list
routeParameters.clearStops();
stopsList.clear();
// clear barriers from route parameters and barriers list
routeParameters.clearPointBarriers();
barriersList.clear();
// reset the route information title pane
routeInformationTitledPane.setText("No route to display");
// clear the directions list
directionsList.getItems().clear();
// clear all graphics overlays
mapView.getGraphicsOverlays().forEach(graphicsOverlay -> graphicsOverlay.getGraphics().clear());
// disable reset button
btnReset.setDisable(true);
}
/**
* Builds a composite symbol out of a pin symbol and a text symbol marking the stop number.
*
* @param stopNumber The number of the current stop being added
* @return A composite symbol to mark the current stop
*/
private CompositeSymbol createCompositeStopSymbol(Integer stopNumber) {
// determine the stop number and create a new label
TextSymbol stopTextSymbol = new TextSymbol(16, (stopNumber).toString(), 0xFFFFFFFF, TextSymbol.HorizontalAlignment.CENTER, TextSymbol.VerticalAlignment.BOTTOM);
stopTextSymbol.setOffsetY((float) pinImage.getHeight() / 2);
// construct a composite symbol out of the pin and text symbols, and return it
return new CompositeSymbol(Arrays.asList(pinSymbol, stopTextSymbol));
}
/**
* Toggles and resets the preserve stops checkboxes.
*/
@FXML
private void togglePreserveStopsCheckBoxes() {
// un-tick and disable the second-tier checkboxes
preserveFirstStopCheckBox.setSelected(false);
preserveFirstStopCheckBox.setDisable(!preserveFirstStopCheckBox.isDisabled());
preserveLastStopCheckBox.setSelected(false);
preserveLastStopCheckBox.setDisable(!preserveLastStopCheckBox.isDisabled());
}
/**
* Stops and releases all resources used in application.
*/
public void terminate() {
if (mapView != null) {
mapView.dispose();
}
}
}