ArcGISFeatureTable QML Type

Returns the result of the addedFeaturesCount operation (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

See also addedFeaturesCountResultAsInt.

The same as addedFeaturesCountResult but represented as an integer type (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

This property was introduced in Esri.ArcGISRuntime 100.3.

Returns the status of the addedFeaturesCount operation (read-only).

See also Enums.TaskStatus.

Returns the result of the addedFeatures operation (read-only).

Returns the status of the addedFeatures operation (read-only).

See also Enums.TaskStatus.

The table's contingent values definition (read-only).

The contingent values definition must be loaded after the table has loaded. If the list of field groups is empty after loading, then no contingent values are defined for this table.

This property was introduced in Esri.ArcGISRuntime 100.13.

Returns the table's default subtype code (read-only).

This property was introduced in Esri.ArcGISRuntime 100.3.

Returns the result of the deletedFeaturesCount operation (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

See also deletedFeaturesCountResultAsInt.

The same as deletedFeaturesCountResult but represented as an integer type (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

This property was introduced in Esri.ArcGISRuntime 100.3.

Returns the status of the deletedFeaturesCount operation (read-only).

See also Enums.TaskStatus.

Returns the result of the deletedFeatures operation (read-only).

Returns the status of the deletedFeatures operation (read-only).

See also Enums.TaskStatus.

Returns the names of the table's editable attribute fields (read-only).

This property is populated after the table loads.

Returns a list of FeatureSubtype objects describing the subtypes of the layer (read-only).

This list is included for layers that have subtypes. The domains in the types list will match the domains in the subtype list for layers that have a unique value renderer based on the subtype column.

This property was introduced in Esri.ArcGISRuntime 100.3.

Returns a list of feature templates for this ArcGISFeatureTable (read-only).

A feature template contains all the information required to create a feature, including the attributes a feature is created with. An ArcGISFeatureTable may have one or more feature templates that correspond to different types of features that you may create in the ArcGISFeatureTable.

You can get feature templates if this ArcGISFeatureTable does not contain feature subtypes.

This property is populated after the table loads.

Returns a list of feature types for this ArcGISFeatureTable (read-only).

This property is populated after the table loads.

Returns the name of the table's global ID field (read-only).

This property is populated after the table loads.

Returns whether feature attachments are enabled (read-only).

This property is populated after the table loads.

Returns whether the feature table has local edits. (read-only)

For ServiceFeatureTable, local edits are edits that have not yet been applied to the feature service. For GeodatabaseFeatureTable, local edits are edits that have been made since the last acknowledged upload.

For mobile geodatabases created by ArcGIS Pro, this method returns false because there is no concept of uploading or applying edits. For mobile geodatabases, use GeodatabaseFeatureTable::hasLocalEditsSince(date).

When a table is not change-tracked, it will emit an Error with an Error::code of 3071 (Geodatabase change tracking not enabled).

This property was introduced in Esri.ArcGISRuntime 100.9.

Returns the service information associated with the feature layer (read-only).

Note, feature layer information can only be obtained after the table is loaded.

The result returned when the asynchronous localEditsCount operation completes (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

This property was introduced in Esri.ArcGISRuntime 100.12.

See also localEditsCountResultAsInt.

The result returned when the asynchronous localEditsCount operation completes (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

This property was introduced in Esri.ArcGISRuntime 100.12.

The current status of the asynchronous localEditsCount operation (read-only).

This property was introduced in Esri.ArcGISRuntime 100.12.

The result returned when the asynchronous localEdits operation completes (read-only).

This property was introduced in Esri.ArcGISRuntime 100.12.

The current status of the asynchronous localEdits operation (read-only).

This property was introduced in Esri.ArcGISRuntime 100.12.

Returns the name of the table's object ID field (read-only).

This property is populated after the table loads.

Returns the result of the queryRelatedFeatureCount operation (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

This property was introduced in Esri.ArcGISRuntime 100.3.

See also queryRelatedFeatureCountResultAsInt.

The same as queryRelatedFeatureCountResult but represented as an integer type (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

This property was introduced in Esri.ArcGISRuntime 100.3.

Returns the status of the queryRelatedFeatureCount operation (read-only).

This property was introduced in Esri.ArcGISRuntime 100.3.

See also Enums.TaskStatus.

Returns a list of results from a queryRelatedFeatures operation (read-only).

These results contain the related features to the queried feature.

Obtain the results once the queryRelatedFeaturesStatusChanged signal emits, and the queryRelatedFeaturesStatus is complete.

Returns the status of the queryRelatedFeatures operation (read-only).

See also Enums.TaskStatus.

Returns a list of all related tables that have been added to the map.

Only returns tables that have been added to the map that this table is associated with. This property is populated after this table loads.

This property was introduced in Esri.ArcGISRuntime 100.1.

Returns the layer ID in the feature service that this table was created from (read-only).

Note, service layer ID can only be obtained after the table is loaded, with the exception of GeodatabaseFeatureTable which can obtain the service layer ID after instantiation.

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

See also serviceLayerIdAsInt.

The same as serviceLayerId but represented as an integer type (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

This property was introduced in Esri.ArcGISRuntime 100.3.

Return the table's subtype field (read-only).

If the table does not have subtypes, an empty string is returned.

This property was introduced in Esri.ArcGISRuntime 100.3.

Returns the name of the table's type ID field (read-only).

This property is populated after the table loads.

Returns the unknown data from the source JSON.

Unknown JSON is a jsobject of values that was in the source JSON but was not parsed by the Runtime.

This property was introduced in Esri.ArcGISRuntime 100.8.

Returns the unsupported data from the source JSON.

Unsupported JSON is a QJsonObject of values that are supported by webmaps, but not exposed through the native Runtime API.

This property was introduced in Esri.ArcGISRuntime 100.8.

Returns the result of the updatedFeaturesCount operation (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

See also updatedFeaturesCountResultAsInt.

The same as updatedFeaturesCountResult but represented as an integer type (read-only).

Note: The underlying Runtime property is represented as a 64-bit integer type. See Accessing 64-bit integer properties from QML.

This property was introduced in Esri.ArcGISRuntime 100.3.

Returns the status of the updatedFeaturesCount operation (read-only).

See also Enums.TaskStatus.

Returns the result of the updatedFeatures operation (read-only).

Returns the status of the updatedFeatures operation (read-only).

See also Enums.TaskStatus.

Whether the dataset should be visualized using advanced CIM symbology from the service.

You cannot change this property after the table is successfully loaded.

The default value is true.

Services that do not support CIM symbols will ignore this property and return regular symbols instead.

Returns the result of the validateRelationshipConstraints operation (read-only).

See also Enums.RelationshipConstraintViolationType.

Returns the status of the validateRelationshipConstraints operation (read-only).

See also Enums.TaskStatus.

Emitted when the addedFeaturesCountStatus property changes.

Note: The corresponding handler is onAddedFeaturesCountStatusChanged.

Emitted when the addedFeaturesStatus property changes.

Note: The corresponding handler is onAddedFeaturesStatusChanged.

Emitted when the defaultSubtypeCode property changes.

Note: The corresponding handler is onDefaultSubtypeCodeChanged.

This signal was introduced in Esri.ArcGISRuntime 100.3.

Emitted when the deletedFeaturesCountStatus property changes.

Note: The corresponding handler is onDeletedFeaturesCountStatusChanged.

Emitted when the deletedFeaturesStatus property changes.

Note: The corresponding handler is onDeletedFeaturesStatusChanged.

Emitted when the editableAttributeFields property changes.

Note: The corresponding handler is onEditableAttributeFieldsChanged.

Emitted when the featureSubtypes property changes.

Note: The corresponding handler is onFeatureSubtypesChanged.

This signal was introduced in Esri.ArcGISRuntime 100.3.

Emitted when the featureTemplates property changes.

Note: The corresponding handler is onFeatureTemplatesChanged.

Emitted when the featureTypes property changes.

Note: The corresponding handler is onFeatureTypesChanged.

Emitted when the globalIdField property changes.

Note: The corresponding handler is onGlobalIdFieldChanged.

Emitted when the hasAttachments property changes.

Note: The corresponding handler is onHasAttachmentsChanged.

Emitted when the hasLocalEdits property changes.

Note: The corresponding handler is onHasLocalEditsChanged.

This signal was introduced in Esri.ArcGISRuntime 100.9.

Emitted when the layerInfo property changes.

Note: The corresponding handler is onLayerInfoChanged.

Emitted when the localEditsCountStatus property changes.

Note: The corresponding handler is onLocalEditsCountStatusChanged.

This signal was introduced in Esri.ArcGISRuntime 100.12.

Emitted when the localEditsStatus property changes.

Note: The corresponding handler is onLocalEditsStatusChanged.

This signal was introduced in Esri.ArcGISRuntime 100.12.

Emitted when the objectIdField property changes.

Note: The corresponding handler is onObjectIdFieldChanged.

Emitted when the queryRelatedFeatureCountStatus property changes.

Note: The corresponding handler is onQueryRelatedFeatureCountStatusChanged.

This signal was introduced in Esri.ArcGISRuntime 100.3.

Emitted when the queryRelatedFeaturesStatus property changes.

Note: The corresponding handler is onQueryRelatedFeaturesStatusChanged.

Emitted when the relatedTables property changes.

Note: The corresponding handler is onRelatedTablesChanged.

Emitted when the serviceLayerIdAsInt property changes.

Note: The corresponding handler is onServiceLayerIdAsIntChanged.

This signal was introduced in Esri.ArcGISRuntime 100.3.

Emitted when the serviceLayerId property changes.

Note: The corresponding handler is onServiceLayerIdChanged.

Emitted when the subtypeField property changes.

Note: The corresponding handler is onSubtypeFieldChanged.

This signal was introduced in Esri.ArcGISRuntime 100.3.

Emitted when the typeIdField property changes.

Note: The corresponding handler is onTypeIdFieldChanged.

Emitted when the updatedFeaturesCountStatus property changes.

Note: The corresponding handler is onUpdatedFeaturesCountStatusChanged.

Emitted when the updatedFeaturesStatus property changes.

Note: The corresponding handler is onUpdatedFeaturesStatusChanged.

Emitted when the useAdvancedSymbology property changes.

Note: The corresponding handler is onUseAdvancedSymbologyChanged.

Emitted when the validateRelationshipConstraintsStatus property changes.

Note: The corresponding handler is onValidateRelationshipConstraintsStatusChanged.

Returns the features added since the last sync.

For mobile geodatabases created by ArcGIS Pro, this method returns no features because there is no concept of syncing. Returns a string representing the task ID of the asynchronous task.

Returns the task object representing the asynchronous retrieval of features added since last sync. The value of the task result is a FeatureQueryResult object.

See also Enums.TaskStatus and Cancelable.

Returns the number of features added since the last sync.

The task object representing the asynchronous retrieval of features added since last sync. The value of the task result is a string.

For mobile geodatabases created by ArcGIS Pro, this method returns 0 because there is no concept of syncing.

See also Enums.TaskStatus and Cancelable.

Returns possible values for the specified field, in the context of defined contingencies.

• feature - The feature.
• field - The name of the field for which to get possible values.

This method iterates over all the field groups that the input field participates in. For each, it looks at the input feature's field values for the other fields participating in that field group. Contingencies that are satisfied by the other fields are identified, and their values for the input field are aggregated. These are returned in a ContingentValuesResult, which contains a dictionary of field group names and an associated list of ContingentValue objects. These object are accessed via ContingentValuesResult::contingentValuesByFieldGroup, by specifying possible values for the input field that will satisfy a contingency in that field group. If the feature participates in multiple field groups and there are values that will satisfy all groups, they will be returned by ContingentValuesResult::contingentValuesAllGroups.

This method was introduced in Esri.ArcGISRuntime 100.13.

Returns a new ArcGISFeature based on the given featureSubtype.

Creates a feature object in memory without adding it to the dataset. Use addFeature or addFeatures to add the new feature to the dataset.

This method was introduced in Esri.ArcGISRuntime 100.3.

Returns a new ArcGISFeature based on the given featureSubtype and geometry.

Creates a feature object in memory without adding it to the dataset. Use addFeature or addFeatures to add the new feature to the dataset.

This method was introduced in Esri.ArcGISRuntime 100.3.

Returns a new ArcGISFeature based on the given featureTemplate.

Creates a feature object in memory without adding it to the dataset. Use addFeature or addFeatures to add the new feature to the dataset.

Returns a new ArcGISFeature based on the given featureTemplate and geometry.

Creates a feature object in memory without adding it to the dataset. Use addFeature or addFeatures to add the new feature to the dataset.

Returns a new ArcGISFeature based on the given featureType.

Creates a feature object in memory without adding it to the dataset. Use addFeature or addFeatures to add the new feature to the dataset.

Returns a new ArcGISFeature based on the given featureType and geometry.

Creates a feature object in memory without adding it to the dataset. Use addFeature or addFeatures to add the new feature to the dataset.

Returns the features deleted since the last sync.

Returns a task ID representing the asynchronous retrieval of features deleted since last sync. The value of the task result is a FeatureQueryResult object.

For mobile geodatabases created by ArcGIS Pro, this method returns 0 because there is no concept of syncing.

See also Enums.TaskStatus and Cancelable.

Returns the number of features deleted since the last sync.

The task object representing the asynchronous retrieval of features deleted since last sync. The value of the task result is string.

See also Enums.TaskStatus and Cancelable.

Returns a feature template given its name.

Returns a feature type given its name.

Returns all the features that were added, updated or deleted since the last sync.

Returns a LocalFeatureEditsResult object containing a FeatureIterator of LocalFeatureEdit objects. For mobile geodatabases created by ArcGIS Pro, the iterator in the result object is empty because there is no concept of syncing.

Note that edits inside a transaction (between calls to Geodatabase::beginTransaction and either Geodatabase::commitTransaction or Geodatabase::rollbackTransaction) share a common LocalFeatureEdit::editDateTime and may not be returned in a consistent order.

Returns a string representing the task ID of the asynchronous task.

This method was introduced in Esri.ArcGISRuntime 100.12.

Returns the number of features that were added, updated or deleted since the last sync.

For a mobile geodatabase created by ArcGIS Pro, this method returns a count of 0 because there is no concept of syncing.

Returns a string representing the task ID of the asynchronous task.

This method was introduced in Esri.ArcGISRuntime 100.12.

Determines the count of features related to the provided feature.

A task that represents the asynchronous query of related feature count. The value of the task result contains a string.

The queryRelatedFeatureCountStatusChanged signal emits when the operation is complete. Check the queryRelatedFeatureCountStatus property to make sure the operation completed successfully. The results are then available through queryRelatedFeatureCountResult.

This method was introduced in Esri.ArcGISRuntime 100.3.

See also Cancelable.

Determines the count of features related to the supplied feature based on the relatedQueryParameters.

A task that represents the asynchronous query of related feature count. The value of the task result contains a string.

The queryRelatedFeatureCountStatusChanged signal emits when the operation is complete. Check the queryRelatedFeatureCountStatus property to make sure the operation completed successfully. The results are then available through queryRelatedFeatureCountResult.

Returns a task ID that can be used to cancel the task.

This method was introduced in Esri.ArcGISRuntime 100.3.

See also Cancelable.

Queries for related features of a given feature in all relationships.

This table and all related tables must be associated with the same GeoModel, either as a feature source for a layer or added to the GeoModel via GeoModel.tables. Otherwise, the query will return no results.

The queryRelatedFeaturesStatusChanged signal emits when the operation is complete. Check the queryRelatedFeaturesStatus property to make sure the operation completed successfully. The results are then available through queryRelatedFeaturesResults.

This method was introduced in Esri.ArcGISRuntime 100.1.

Queries for features related to the given feature in a specific relationship.

• feature - The feature.
• relatedQueryParameters - Description of the relationship and the query to perform.

This table and related tables must be associated with the same GeoModel, either as a feature source for a layer or added to the GeoModel via GeoModel.tables. Otherwise, the query will return no results.

The queryRelatedFeaturesStatusChanged signal emits when the operation is complete. Check the queryRelatedFeaturesStatus to make sure the operation completed successfully. The results are then available through queryRelatedFeaturesResults.

This method was introduced in Esri.ArcGISRuntime 100.1.

Returns list of tables related by the given relationshipInfo.

Only returns tables that have been added to the same map. If there are multiple instances of the related table on the map, all such instances will be returned.

This method was introduced in Esri.ArcGISRuntime 100.1.

Requests a collection of features updated in the local dataset but not yet updated in the original source dataset using an asynchronous task.

This method uses an asynchronous task that cannot be started if it is already running from a previous call to updatedFeatures. You should check that the updatedFeaturesStatus property is not Enums.TaskStatusInProgress before calling this method.

After the task starts, you may use the signal updatedFeaturesStatusChanged to monitor task status.

Returns a task ID that can be used to cancel the updatedFeatures task.

For mobile geodatabases created by ArcGIS Pro, this method returns 0 because there is no concept of syncing.

See also Enums.TaskStatus and Cancelable.

Returns a count of features updated in the local dataset but not yet updated in the original source dataset.

Returns a task ID representing the asynchronous retrieval of features updated since last sync. The value of the task result is string.

For mobile geodatabases created by ArcGIS Pro, this method returns 0 because there is no concept of syncing.

See also Enums.TaskStatus and Cancelable.

Returns a list of contingency constraint violations based on the input feature. An empty list indicates that all contingencies associated with the feature are valid.

• feature - The feature.

This method was introduced in Esri.ArcGISRuntime 100.13.

Validates constraints for a given feature participating in a relationship.

A task that represents the asynchronous validation of relationship constraints operation. The value of the task result contains a Enums.RelationshipConstraintViolationType enum.

This method returns a task ID for the asynchronous operation.

• feature - The feature.

The following are considered violations:

• In a composite relationship, adding an orphan feature to the destination table without relating it to an origin feature
• Cardinality Violations: - In 1:1 relationships, if an origin feature is already related to a destination feature, relating another feature to either of them - In 1:n relationships, relating a destination feature to more than one origin feature

To recover from an orphaned destination feature violation, relate it to a valid origin feature. You can usually recover from a cardinality violation by un-relating the appropriate features. See ArcGISFeature::unrelateFeature.

Edit operations do not cause an error when there are constraint violations. This allows you to recover from violations in a back office operation after applying edits or syncing, if you choose to do so. See ArcGIS Desktop topic Validating features and relationships in ArcMap for a description of that process.

This method makes network calls to query for the related features if they are not present locally. If you have just related the feature you are validating, first you must call FeatureTable.updateFeature to reflect the modified attribute value in the table. If this is not done, validation results may be incorrect.

This method was introduced in Esri.ArcGISRuntime 100.1.